The goal of this lab is to investigate the uses of OpAmps.
Check Power Supply:
+ 12 V Power Supply : 11.97 V
-12 V Power Supply: 18.60 V
5 V (TOP) Power Supply: 5.011 V
5 V (BOTTOM) Power Supply: 5.011 V
DO NOT USE HeathKit due the malfunctioning -12 V Power Supply
Bread Board w/ Power Supply:
+ 12 V Power Supply : 11.77 V
-12 V Power Supply: 12.04V
5 V Power Supply: 5..158V
I used the diodes in the above diagram where others did not. It does not make a difference in the oscilloscope readings but rather is a safety measure to protect the opamp.
I was able to get identical waveforms.
Zoomed in and found breakdown of waveform around 7500 H
measure input from function generator (channel 1)
measure output (channel 2) (inverts and adds)